HEADS,COILS & CARTRIDGES
Coils And Heads For E Cigarette's Atomizer
Coils are small components that are used with your e-liquid Tank atomizer or rebuildable dripper atomizer. The purpose of a coil head is to control the amount of power that flows between your battery or box mod and your atomizer tank. Without a coil in between your device and tank, there would be too much power or wattage and no way to control it. Coils are small devices composed of conductive metals and are usually manufactured using materials such as Kanthal, Nickel, Titanium and stainless steel.
Coil heads are rated in Ohm measurements and you will typically see the rating printed directly on the coil head unit. Since the coil controls the amount of power your device will use, make a note of the coil that works best for you. A coil with a rating of 0.2ohm is going to be much different then a coil rated at 1.0ohm. For example, a coil that is rated as a 0.2ohm is supplying very little resistance and will give you a warmer vape at a lower wattage. If you install a 1.0ohm coil, you may be able to use a higher wattage and your atomizer will take a bit longer to get hot because the coil is supplying more resistance between two points. The coil heads you use are strictly personal preference. Coil heads are the components responsible for vapor production and taste.
Inside of these small coil head devices are conductive wires that are surrounded by some sort organic cotton material. This organic cotton material is responsible for a function called “wicking”, which is the soaking up of e-liquid into the cotton. The rate at which a type of organic cotton “re-wicks” itself is based on the composition of the coil and the density and quality of the cotton inside. When you push the fire button of your device, the small wire components that are inside the coil are heated up by the power supplied by your battery. When the fire button is pressed, the e-liquid is “atomized” and transformed into tiny droplets which are then inhaled.
Specifications for proper use of a coil head heating element are specified on the package and certain coils are for specific uses, such as a Nickel (Ni200) which is primarily used for Temperature Control Functions. Devices available today feature highly advanced computer systems and software which allow the user to control the device or box mod in many different fashions. Devices specify which coils are compatible and using the proper coils is of extreme importance.
Our selection of coils is one of the best available and we carry the best brands around including Smok, Kangertech, iJoy, Aspire, and Joyetech to name a few. Our online vape shop is fully stocked and ready to supply you with whatever you need from coil heads to coil building accessories and wire.